Re: [FWDLK] Wheel Pullers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Wheel Pullers



You are correct--all Chrysler products require a puller for the rear hubs.
It is a "3-legged " contraption that bolts to 3 of the bolt holes in the hub
with a large screw that presses on the axle and removes the hub.  BE CAREFUL
to protect the threads on the axle so as to not damage them !!  I have this
puller and also the puller that pulls the axle from the axle housing.  If you
were in the Spokane, Washington area, I would be glad to loan them to you.
Might check any older Chrysler dealership for this.
Bob
56 Fury
70 300 convert

-- -- -- -- -- -- -- --
Calendars are still available.  Don't miss the chance to get yours now!
Details for ordering may be found at:
http://www.forwardlook.net/calendar2002/index.html



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.