Re: [FWDLK] 413 engine
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] 413 engine



I have a 413 Motorhome block in my 65 Polara Convertible, taking the place
of my original 413 with the car heads, intake, and rotating assembly. I
don't find it to be any heavier, nor the least bit sluggish. I've also heard
that they were cast as 440's and only bored to 413 for extra stregth. The
casting date on these blocks remains on the side, while the casting number
is near the oil pressure sending unit fitting.


Dave Casey


----- Original Message -----
From: Lee J Barmakian <FURY58451@xxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, December 28, 2001 5:34 PM
Subject: Re: [FWDLK] 413 engine


> 413 is only an RB Block. They were made for pass use up to 65, Motor Home
use
> much later than that. Stay away fro Motor Home Blocks for pass car use,
way
> too heavy, and the heads have poor flow specs.
>
> Lee J Barmakian
>
> 58 Fury



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.