[FWDLK] Dealing with broken exhaust manifold bolts.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Dealing with broken exhaust manifold bolts.



> What is the best way to go about getting that rusted in,
> broken exhaust bolt, thats also by the way, way back towards
> the firewall and hard to reach?

There is a product call Tap-Out. It is essentially just concentrated
nitric acid which will dissolve carbon steel but will not affect cast
iron or aluminum. A few drops applied to the broken bolt will dissolve
most of it over night and make removal a snap. I'm not sure where you
might purchase this product in your area, but a search on the internet
might turn up a source.


--
> Hey man, What are ya thinking about?
>
>          _____________|_____________
>                    \_[ ]_/
>                     \(o)/  \
>                    {}/^\{}   \
>   It is unwise to be too sure of one's own wisdom.
>   It is healthy to be reminded that the strongest
>   might weaken and the wisest might err.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.