discovered some "392" hemi cams for sale, I was wondering if anyone here has any info about them. #1: This is an OLD new old stock solid lifter camshaft from Iskenderian Camshafts. I do not have the cam card but the markings on the end of the cam read "R57 115 S-32 Iskenderian Hard Face". Maybe someone at Isky can tell us the specs on this camshaft. #2: This is an OLD solid lifter camshaft from Iskenderian Camshafts. I do not have the cam card but the markings on the end of the cam read "B4 04 57 560UHR Magnum Iskenderian Hard Face". #3: This is an OLD solid lifter camshaft from Iskenderian Camshafts. I do not have the cam card but the markings on the end of the cam read "57 115 Z105-8 Iskenderian Hard Face". #4 This is an OLD Flat Tappet camshaft from Engle Racing Cams. The cam card reads "L-169 Chrys Grind, Tappets Ex. .010 Int. .010 HOT, Timing Ex. Open 102 B.B., Close 58 A.T. Int. Open 58 B.T., Close 102 A.B. Lift 530, Duration 340 Degrees". I cut/pasted the pertinate info directly from the listings I found in the adds for the cams. Thanks -- Paul Holmgren Hoosier Corps #33, L-6 2 57 300-C's in Indy |