I gve up! What is a Petronix distributer? John Compton ----- Original Message ----- From: "Terry & Andree Hoeman" <tehoema@xxxxxxxxxxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Monday, April 17, 2000 10:18 AM Subject: [FWDLK] petronix on 55 > I'm at least one 55 guy who bought the kit and installed it. Only problem > to watch for is the dang screw holding it down is too long. Shorten it or > get a shorter one and it drops right into place----on my dual point setup at > least. > > John will treat you right! > > > ----- Original Message ----- > From: Family Brandwijk <fambrwyk@xxxxxxxxxxxx> > To: <L-FORWARDLOOK@xxxxxxxxxxxxx> > Sent: Monday, April 17, 2000 11:40 AM > Subject: [FWDLK] FW: temporary fForwardlook mailstop > > > > -----Oorspronkelijk bericht----- > > Van: Family Brandwijk [mailto:fambrwyk@xxxxxxxxxxxx] > > Verzonden: maandag 17 april 2000 10:38 > > Aan: L-FORWARDLOOK@xxxxxxxxxxxxx] > > Onderwerp: Radio ,electronic ignition pertronics 6 Volt positiv ground and > > temporary Forwardlook mailstop. > > > > > > Abouth my Radio. > > > > I want to thank all the persons who adviced me in a possible convertment > of > > my radio into fm,I told you radio was repaired a few years ago,and I found > > out there was a bulb wich was not working anymore,replaced it and it works > > fine,so mr. Seckman's Antique Radio and Speaker Repair did his work fine,I > > will prospone the FM convertion. > > > > Abouth the electronic ignition, > > > > I emailed and spoke with Mr.John Lazenby he said he had delivered the > > pertronix system before to a Chrysler 1955 owner and since we own a > Plymouth > > 1955 ,is is not sure if it will work because of other distributor nr.This > is > > what he wrote to me: > > -----Oorspronkelijk bericht----- > > Van: John Lazenby [mailto:john@xxxxxxxxx] > > Verzonden: vrijdag 14 april 2000 15:55 > > Aan: Family Brandwijk > > Onderwerp: Re: 6 Volt positiv Pertronix electronic ignition. > > > > > > Hi Dirk, > > > > I did check in my parts books last night and it looks like the same > breaker > > plate and rotor is used in your distributor as well as the Chrysler unit. > > This would lead me to think that the Pertronix unit I offer will work. > > > > If you give me the OK I'll send one to your Florida address. If for some > > reason it does not work you can return it and I will refund the purchase > > price. > > > > Let me know what you wish to do. > > > > John > > > > so I ordered it and when I come back I will let you know if it works. > > > > > > > > A question for Dave,the webmaster: > > Dave,will be going away untill the 9th of may,would like to be removed > from > > the maillist for now,will request new entry when I am back,when neccesary. > > also remove my office email dbrandwijk@xxxxxxxxxxxxx for always also > > in the members list,and replace for email fambrwyk@xxxxxxxxxxxxx > > > > leaves me to wish everybody a happy easter and maby will be seeing some of > > you in Carlisle,thanks and greetings ,Dirk and family. > > >
|