Re: [FWDLK] pulling rear drums
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] pulling rear drums



Maybe mine were not that bad but I did not have a puller so I left the tires
on and loostened up the nut.  a little tugging and hitting the rim with a
hammer and they came off.

Just my 2 cents worth.
Scott

>From: LARSPAINTR@AOL.COM
>Reply-To: LARSPAINTR@AOL.COM
>To: L-FORWARDLOOK@LISTS.PSU.EDU
>Subject: [FWDLK] pulling rear drums
>Date: Fri, 17 Mar 2000 11:53:56 EST
>
>Always use and used a drum puller.
>Shop manuals advise AGAINST hammering due to potential damage to bearings.
>Course hoo nose what and how they had been removed (if they had been
>removed)
>before...
>If U rent a puller WATCH IT.  The local place here their puller will not
>fit
>due to what, the projection of the axle or wuzzit the spacing of the bolts?
>Best to check first
>AND STAND BACK NO MATTER WHAT!
>Rotsa Ruck.
>If I remember right, Lotta hard whacking did not do the trick, a large
>number
>of lighter blows on the knockoff did the trick?
>
>Lars

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.