[FWDLK] Wheel cover paint
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Wheel cover paint



I've beat out the dents and have polished out 9 wheel covers. I've ended up with 4 that are good enough to put right on but the others need repainted black between the 3/8" ribs. The original paint is very tough and was applied without any primer right onto the stainless. What works well applied to chrome and stainless? Any tips on prep etc. Scuffing up the surface doesn't seem practical on the chrome fender trim parts that also have some black accents.
Deane,
'60 Polara (with a lot of stainless trim)
I've just about learned to polish stainless
after 9 covers and 30-40 hours of redoing,
because the 2nd. was better than the 1st.
and the 7th was better than the 6th etc.
 
 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.