Re: [FWDLK] Brake lines again, non forward look
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Brake lines again, non forward look



Yes they do make adapters and they are safe. I also think you can get a
larger nut for the tubing, or use the old nut, and make up your on. Just
remember it is a double flare on brake lines.
             Paul A. Schmidt
-----Original Message-----
From: dirt rider <drt-rdr@xxxxxxxxxxxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx <L-FORWARDLOOK@xxxxxxxxxxxxx>
Date: Wednesday, August 18, 1999 10:57 PM
Subject: [FWDLK] Brake lines again, non forward look


>Hi all, I'm back to working on brake lines, these are in a non forward look
>so if you don't want to know, delete now !
>
>Ok, for who is left. I need to replace one of the lines from the master cyl
>to the proportioning valve. The only problem is each end of the line is a
>different size fitting. Do they make reducer fittings to go from bigger to
>smaller and is this safe ? My guess is it was a special line made for the
>car. The master cyl end is a 9/16 wrench size and the proportiong valve
side
>is a 7/16 wrench size.
>
>any ideas,
>Thanks,
>Nick
>




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.