Re: [FWDLK] PowerFlow 6 ignition wires: No one with my problem?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] PowerFlow 6 ignition wires: No one with my problem?



I found the same problem at
pep Boys. I am sorry to say, I
did not write down what number
wires I did get when I went
back. I took the old ones in
and found a set that was close
in length.

Dan Morton wrote:
>
> Hey Lookers,
>
> I didn't get a single reply to my query (yet).  The counterman gave me
> Borg-Warner CH616 wires for my flathead 6.  The Forward Look Web indicates
> that this is the correct part.  Yet most of the wires are too short -- by at
> least 8 inches.
>
> One of two things is true:
>
> 1) The wrong wires are in the box.
>
> 2) This is actually the wrong part number, despite what B-W's catalog says.
>
> Has anyone else replaced their ignition wires with this part number?  Has
> anyone had success, with this or some other part number, or different brand?
> It's not likely that I can extend the distributor, or stretch the wires...
>
>         "Mystified" Morton
>         '55 Savoy



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.