Re: [FWDLK] Wide block 318 carb options, speed equipment -
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Wide block 318 carb options, speed equipment - Reply to Peter



Peter,

Thanks for the information.  I'd be grateful if you could pass along that name.

Bruce Clough
cloughbt@xxxxxxxxxxxxxxx

>     Bruce,
>     Isky makes a cam.
>     Weiand makes a four barrel aluminum manifold.  Headers have to be
>     custom made.  I have an email of a guy who will make some for 150$.
>     Let me know if you are interested.  I have seen the twin four barrel
>     manifold on the net go for about 250$.  Regards,
>     Peter
>
>
>______________________________ Reply Separator
_________________________________
>Subject: [FWDLK] Wide block 318 carb options, speed equipment
>Author:  Forward Look Mopar Discussion List <L-FORWARDLOOK@xxxxxxxxxxxxx> at
>Internet-Mail
>Date:    8/4/98 12:34 PM
>
>
>Our 61 Fury has a 318 with a single-barrel carb.  Now, I could load a 383 in
>there, but I thought it might be better to keep it more original.  What are
the
>carb options available to me through original equipment, or via the
>aftermarket?  Are headers available?  If so, from who? (I'm going to have to
>remove the exhaust manifolds anyway to fix leaks and the binding heat riser
>should I want to remain original).
>
>Thanks,
>
>Bruce Clough
>'61 Fury & a bunch of other Mopar stuff...





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.