Re: [FWDLK] Anti-sway bars

["jim whitehead" <archer4@xxxxxxxxxxxxx>]

Perhaps cutting it then?


-----Original Message-----
From: James Rawa <Finned440@xxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx <L-FORWARDLOOK@xxxxxxxxxxxxx>
Date: Wednesday, December 02, 1998 5:28 PM
Subject: Re: [FWDLK] Anti-sway bars


>by bending it, you stress it since it is hardened steel... eventually it
will
>crack wherever it actually bent...  unless you heat it up red hot bend it,
>then quench it in hardening oil..../
>
>jim
>