Hi Rich I did a bit more research--You are correct on the 58 COMMANDO All head casting possibilities were 1.94/1.60 valve sizes Still some confusion on the 59 COMMANDOI was told by someone well in the know,, there were about 6 casting numbers that could be put on the 59 361 engine. All were 1.94/1.60 configuration---EXCEPT for one Casting 1851509 had 2.08 intakesHe was not certain whether these heads were confined to the 413 in the 300E or also went on the GOLDEN COMMANDO ED l On Tue, Mar 26, 2019 at 11:38 AM, Richard Whelan wrote: 1958-350 CI were 1.95 and 1.60 per the service manual. Looks like the 361 got a little bigger valves.-----Original Message----- From: eddee@xxxxxxxxxxxxx Sent: Tuesday, March 26, 2019 11:23 AM To: L-FORWARDLOOK@xxxxxxxxxxxxx Subject: [FWDLK] 1959 361 motor head question Hello All Just happened to notice in the 1959 PLYMOUTH SERVICE MANUAL SUPPLIMENT that on page 33 it states that the 361 cylinder heads came with 2.08 intake valves and 1.74 exhaust valves. IS THAT CORRECT???? I was under the impression that the sizes in those days were 1.94/1.6 RSVP ED ECKERSON ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1Help the Forward Look with every eBay purchase by starting your search here:http://www.ForwardLook.net/eBay Help the Forward Look with every Amazon purchase by clicking here: http://www.ForwardLook.net/Amazon --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 Help the Forward Look with every eBay purchase by starting your search here: http://www.ForwardLook.net/eBay Help the Forward Look with every Amazon purchase by clicking here: http://www.ForwardLook.net/Amazon
|