|
The best way is to have someone push and hold R, that keeps the cable bullet out as far as possible to line up and lock into the shift shuttle, once it's engaged, push and hold N, if your pan is off its easy, listen for the click into N on the valve body and see the neutral safety switch contacted. If the pan is on, put an audible continuity tester from the case to neutral safety connection, wire to solenoid off. Listen for it to ring in N...then lock the cable slider tight Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: David Wallace <0000229170b62857-dmarc-request@xxxxxxxxxxxxx> Date: 9/28/16 4:58 PM (GMT-05:00) To: L-FORWARDLOOK@xxxxxxxxxxxxx Subject: [FWDLK] install shift cable What's the trick to install the shift cable in a 1958 plymouth torqueflite. I had to take the transmission out to replace the front pump seal and now it's time to put it back in. Thanks David Wallace 2958 Fury ************************************************************* To unsubscribe or set your subscription options,
please go to Help The Forward Look with every Amazon purchase by clicking here!
|
Back to the Home of the Forward Look Network