From: Dave Stragand <dave.stragand@xxxxxxxxxxxxxxx>
Date: Mon, 22 Apr 2013 07:09:45 -0400
Ditto. Hard to believe, but very true.
On Apr 22, 2013, at 12:16 AM, "Brent Burger" <cgico@xxxxxxxxxxx> wrote:
A 50/50 mix of ATF and acetone is the all-time best rust penetrator for freeing stuck items.
Cheap and easy to mix up, just put it in a spray bottle and you're off to the rodeo. Can be applied with a brush, or dunk whole
parts in a bowl of the stuff. Beats the pants off PB or WD.
B.
=========================================
On Apr 21, 2013, at 9:06 PM, David F. Darby wrote:
Hello Greg,
Thanks for the advice.
David
From:Greg C [mailto:gcc426@xxxxxxxxx] Sent:Sunday, April 21, 2013 8:05 PM Subject:Re: [FWDLK] Newbie
Frozen bleeders can be freed. Presoak the bleeder with a good rust remover or some PB Blaster for s day. Use some flame, propane will do, and heat the area around the bleeder but not the bleeder itself. Get it so it's just glowing red. Then smack the bleeder screw dead on with a hammer, maybe more than once. Bleeder should come right out. I usually end up using a pair of vise grips so you'll want to replace the screw, prefereably with a stainless steel one if you can find it.
