|
The 277 exhaust manifold may bolt up to the later poly's, but
the size of the openings may be smaller. My 25 Fury called for an exhaust
manifold that very few seem to be able to find. It apparently was cast and
installed on truck engines rather than passenger vehicles. If you need
large capacity exhaust, I would look elsewhere.
John
In a message dated 1/29/2012 3:17:23 P.M. Eastern Standard Time,
AdamL57@xxxxxxx writes:
It should fit, the differences in the early and late poly's is the crank
and bore and stroke.
Adam
In a message dated 1/29/2012 2:18:04 P.M. Eastern Standard Time,
drt-rdr@xxxxxxxxxxx writes:
Anyone see a problem
using a 277 exhaust manifold on a 64 poly 318?
Nick
Sent
from my Verizon Wireless 4G LTE
Phone
-----Original message-----
From: Eastern
Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>
To:
L-FORWARDLOOK@xxxxxxxxxxxxx
Sent: Sun, Jan 29, 2012 19:12:41
GMT+00:00
Subject: Re: [FWDLK] PARTS FOR US,,,care of
chebbies!!
ED, can you post up some images of these parts, or
PM me with
their page jay-pegs, & I'll post them here, for
you.
Neil Vedder
On 1/29/2012 6:10 AM,
eddee@xxxxxxxxxxxxx wrote:
> HELLO MEMBERS!!
>
> Just
passing along something that I came across
>
> CORVETTE
CENTRAL------in looking thru their ctalog,,there are some NEW > PARTS
that we can use for our mopars!!
> NOT CHEAP!!-but new
!!
>
>
------------------------------------------------------------------------------------------------------------------------------------------
>
>
> ANTISTAT CAPACITORS for generator,,,voltage regulator
and coil!!-- > almost identical to ours
> OIL FILLER TUBE
CAPS--IDENTICAL!!
> BALLAST RESISTERS--almost identical to
ours
>
> HAVE FUN
> ED ECKERSON
> LI
NY
>
>
*************************************************************
>
>
To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
*************************************************************
To
unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 |
Back to the Home of the Forward Look Network