Re: [FWDLK] Polarizing

[Tim Bowers <stellarrestorations@xxxxxxx>]

It's not the regulator, but the generator that requires polarizing, but you can do it from the regulator as Richard describes.


---- Richard Whelan <rwhelansr@xxxxxxxxxxxxxxxx> wrote: 
> Should be a momentary jump between the GEN terminal and the BAT terminal. Dick
> 
> 
> From: Jack Johnson 
> Sent: Wednesday, November 30, 2011 9:58 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx 
> Subject: [FWDLK] Polarizing
> 
> 
> I didn't receive any reply's to my question about polarizing.  Any body got the answer?  I have seen it somewhere, but can't find it.
> Jack in Shinglehouse, PA
> 
> 
> 
>   Hi to ALL,
>      What are the 2 terminals that you have to short out when polarizing a 6 volt voltage regulator with a positive ground system.  
>   Thank you in advance.
>   Jack  In Shinglehouse, PA   Wet and rainy today and no buck yesterday while hunting.  
> 
> 
> ------------------------------------------------------------------------------
> 
> 
> 
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1873 / Virus Database: 2102/4649 - Release Date: 11/30/11
> 
> 
> *************************************************************
> 
> To unsubscribe or set your subscription options, please go to 
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 
> 
> *************************************************************
> 
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1