Re: [FWDLK] NOS WCFB carb

[Bjwt 56 <Bjwt56@xxxxxxx>]

Folks:

 

    That square aluminum base is also on the 56 Fury, Chrysler and DeSoto hand choked WCFB's.  I have a set of each.  I think they are factory race carbs.

 

    John

 

In a message dated 7/18/2011 7:27:38 A.M. Eastern Daylight Time, jrawa@xxxxxxx writes:

is that an aluminum base????  oh i just realized.... that's a teapot base patter WCFB application- fits 331 hemi, 55 desoto 291, and all ford apps to 1957.. maybe early dodge red ram too- with the small square pattern, also fits a 56 packard [as i have an NOS 56 packard carb on my 57 linc]. that one wouldnt fit a fury intake...  mopar 56-58 WCFBS have an iron base, as on your fury.

-----Original Message-----
From: Glenn Barratt <FURY@xxxxxxxxxx>
To: L-FORWARDLOOK <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Sun, Jul 17, 2011 11:57 pm
Subject: [FWDLK] NOS WCFB carb

Allegedly, this was a NOS WCFB carb on Ebay a few years ago. I don’t know much else about it.

AFBs may have been different.

Glenn.

 

 

 

 

-----Original Message-----
From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Dave Homstad
Sent: Monday, July 18, 2011 3:46 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Carb Detailing Paint

 

Ron,

 

I don't ever recall seeing a "bronze" colored factory carb before.

 

 

Dave Homstad

56 Dodge D500

 

 

On Sun, Jul 17, 2011 at 1:12 PM, Ron Waters wrote:

 

> Eastwood sells a bronze colored carburetor detailing paint. Has

> anybody used this and do they have any advice ? I've hesitated to try

> it, since I'm concerned that the paint will get into places where it

> shouldn't and gum things up.

> 

> Ron *************************************************************

> 

> To unsubscribe or set your subscription options, please go to

> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

 

*************************************************************

 

To unsubscribe or set your subscription options, please go to

http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&AMP;A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1