Re: [FWDLK] PISTONS FOR A 350

[Jim Rawa <jrawa@xxxxxxx>]

guess what?  a .060" over 350 piston = a std bore 361 piston at 4.12 bore [over 4.06 for 350]   361 designated pistons will probably be priced cheaper by app, considering at least a 5 year run on that engine, over a 58 only 350 as a commando or the entry-level V8 engine for dodge/desoto and also for trucks....

dont worry about the future... you plan to put 80,000 miles on it anytime soon??? then it wont need a rebuild again!

-----Original Message-----
From: Bjwt 56 <Bjwt56@xxxxxxx>
To: L-FORWARDLOOK <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Tue, Jul 12, 2011 5:36 pm
Subject: Re: [FWDLK] PISTONS FOR A 350

Ed:

 

    If you can get +60 pistons, it should be possible to turn them down to the size you want.

 

    John

 

In a message dated 7/12/2011 4:20:30 P.M. Eastern Daylight Time, glpavlovich@xxxxxxx writes:

ED,

Adam is correct in that you will need a custom piston if your other vendors
cannot supply the smaller overbore you need.  I have used ROSS for most of
my custom Poly pistons as well as Venolia.

Keep us posted on what transpires.

Gary Pavlovich

-----Original Message-----
From: eddee@xxxxxxxxxxxxx
Sent: Tuesday, July 12, 2011 9:07 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] PISTONS FOR A 350

Hello Group

Does anyone have or specifically know of any one who has or can make
+030 pistons for a 1958 350 PLYMOUTH.
Even +20 or +40 would be fine.

I CAN GET +060s,,,,,,,,,,,,,,,,,,,but the bore is surprisingly clean and
only needs +020 over.

I have checked with EGGE and OLD TIME PARTS with no success
THANK YOU
ED ECKERSON
LI  NY

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&AMP;A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1