Re: [FWDLK] Tubes

[Dave Homstad <dhomstad@xxxxxxxxxxx>]

About 10 years ago, I bought some heater hose that had a thick wire molded into the wall. It was supposed to make the hose bendable and hold the shape without kinks. It worked somewhat OK. I don't know if it is still available. 

Dave Homstad 
56 Dodge D500 

---- William Huff <whuff@xxxxxxxxxx> wrote: 
> I know it's not stock, but I have used exhaust pipe of the proper 
> size for odd bends I couldn't buy or make in radiator hoses 
> before.  That way the hose portions are mostly straight.
> 
> Bill Huff
> 
> 
> At 10/28/201011:02 PM, Jan & Roger van Hoy wrote:
> >I've got a question for you '56 Plymouth guys, it the lower hose to 
> >the heater valve a specially formed hose?  I tryed to use regular 
> >stock hose and it woudn't bend sharply enough, had to use a lot 
> >longer piece to get it to curve.
> >
> >--Roger van Hoy
> >
> >
> >----- Original Message ----- From: "Matt Proske" <mproske@xxxxxxxxxxxxx>
> >To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> >Sent: Thursday, October 28, 2010 5:10 PM
> >Subject: [FWDLK] Tubes
> >
> >
> >>As shown in the image, mine has the bent tube on bottom.
> >>
> >>
> >>*************************************************************
> >>
> >>To unsubscribe or set your subscription options, please go to
> >>http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >
> >
> >--------------------------------------------------------------------------------
> >
> >
> >>
> >>
> >>
> >>Matt
> >>
> >>Mobile
> >>
> >>*************************************************************
> >>
> >>To unsubscribe or set your subscription options, please go to
> >>http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >
> >
> >--------------------------------------------------------------------------------
> >
> >
> >
> >No virus found in this incoming message.
> >Checked by AVG - www.avg.com
> >Version: 8.5.448 / Virus Database: 271.1.1/3223 - Release Date: 
> >10/27/10 19:12:00
> >
> >*************************************************************
> >
> >To unsubscribe or set your subscription options, please go to
> >http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> 
> *************************************************************
> 
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1