Re: [FWDLK] '58 FURY

[Dave Homstad <dhomstad@xxxxxxxxxxx>]

T3 headlights came out in 1956. I had them on my 56 Oldsmobile. They are a Delco (GM) product. I doubt they were ever OEM on a Mopar. 

My 56 Dodge still has the original AutoLite headlights. They work great and are still very bright. Much better than T3s. Too bad they are no longer made. 

Dave Homstad 
56 Dodge D500 

---- Jim Rawa <jrawa@xxxxxxx> wrote: 
> 
> 
> 
> 
> the plymouth doesn't have a horn relay... they are fed a constant hot via the green wire- it attaches at the solenoid- the black wire grounds directly through the column- if the horns do not work, it is either the contact plate the horn ring sets on, the roller assy that contacts the steering wheel on p/s cars, or the horns themselves... and of course, lack of voltage.
> 
> T3's...... i dont think they made them yet- that smuscle era/61 up stuff.... i think they're typically GE's.... the 17k-32k mile survivors over the years had GE or westinghouse - not the ge script in the center though- those were on fords...
> 
> 
> -----Original Message-----
> From: Adam Lindenbaum <adaml57@xxxxxxx>
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Sent: Fri, Oct 8, 2010 4:42 pm
> Subject: Re: [FWDLK] '58 FURY
> 
> 
> I have a pair of NOS headlight mount panels and buckets, the headlights in those are T3's, maybe you can find them on EBAY. Most of the other parts are also on there from time to time, good luck.
> Adam Lindenbaum
> 
> 58 426 HEMI/4 Speed Fury
> 57 Savoy Kustom
> V800 powered 27 Ford Roadster pickup
> 
> 
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Mike Squires <squires1fam@xxxxxxxxxxxx>
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Sent: Fri, Oct 8, 2010 4:19 pm
> Subject: [FWDLK] '58 FURY
> 
> 
>     Hi Fury experts...
>  
> My friend and I are restoring a 1958 Plymouth Fury.  We have need for information on several parts if anyone has or knows where to locate them...here they are.
>  
> . What are the correct headlamps both high and low beam?
>   (what were the originals and are they still available?  also,
>    if the original ones are not available what is the 
>    replacement bulbs and where can I find them?)
>  
> . Need the Horn Relay switch.  Does anyone have one and 
>   if not do you know where I can locate one.
>  
> . Need a floor dimmer switch...
>  
> . Need the correct ballast resister.
>  
> . Still need information on where to find the clips for the
>   wrinkled stainless on each side of the top.
>  
> Any information or availability would be appreciated...
>  
>  Thanks, Mike 
> 
> *************************************************************
> To unsubscribe or set your subscription options, please go to 
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 
> 
> 
> *************************************************************
> To unsubscribe or set your subscription options, please go to 
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 
> 
> 
> *************************************************************
> 
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1