Plastidip.
Owen
From: Forward Look
Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
Sent: Wednesday, 5 May 2010 1:48
p.m.
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Ignition wire
holders
There is a dip that is commonly available (Home Depot, etc.) that is
used for rubber coating tool handles. That's what I used. Took me a little
while to get the look I wanted, but they look great when done right.
----- Original Message -----
Sent: Tuesday, May 04,
2010 9:23 PM
Subject: [FWDLK] Ignition
wire holders
On the v8 I have for my 56 Plym, on top of the valve covers
are some holders to hold the spark plug wires. They look to originally have had
some rubber coating or something on them to keep the holders from wearing
through the wires.
So....What are you folks doing for that or are you just
stripping and painting them and using them with no coating?
*************************************************************
To
unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 |
