|
A cast iron four barrel just sold for $291 or so on
E-bay. I would check out the Offy three deuce aluminum as it is a dual
plane intake, available new, and you can block the outboard carbs as dummies and
just run the center 2bbl. for killer looks, same perf. as the single two intake,
and "options" to reign in the the six-pack power when your funds or expertise
allows; a win-win.
By the way, I do have the ultra-rare 1956 Plymouth
Fury dual quad aluminum intake #1735919 available for anyone in need with a Fury
303 or early Poly 277/318 engine.
Gary Pavlovich
----- Original Message -----
Sent: Saturday, December 19, 2009 11:03
AM
Subject: Re: [FWDLK] Dodge 325 / Plymouth
318 speed equip?
The more I look over the info I
have on the Plymouth poly the Dodge 325 poly has a different deck
height so not much will interchange with the Plymouths poly? Are there 4bbl
intakes or 2X4 intakes out there? That 2bbl while serviceable looks to tame on
a finned MoPar!
----- Original Message -----
Sent: Saturday, December 19, 2009 12:47
PM
Subject: [FWDLK] Dodge 325 / Plymouth
318 speed equip?
On this 325 Dodge (1957) poly
what will interchange with the Plymouth 301/318? (1957/58/59/60ect) Intake
maybe? cam? ect?
debenson2
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
| 
Back to the Home of the Forward Look Network