Re: [FWDLK] [Fwd: [FWDLK] Vacuum advance question.]

[Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>]

Thanks!

I checked all the P/N cross references on that NOSMoPar site, and this 
V.A. does appear to service
all of the 57 Dodge (and DeSoto Firesweep) V/8's, without further 
explanation, but, I wonder if anyone can research what, in
particular, a D500 and/or Super D500 might require, for a vacuum advance 
( P/N) , as it/they might differ from this guy's
general " V/8 " operating-specifications?

Or, does one-size-fit-all, as far as vacuum advances are concerned?

This one does have a "13" appear on its control arm.

Neil Vedder



Jim Carpenter wrote:
> Just a reminder that you can find the application for many numbers 
> including this one at WWW.NOSMOPAR.COM or WWW.CollectorsAutoSupply.com 
> <WWW.NOSMOPAR.COM>
>
> Go to the "Parts Department" and then "Look Up A Number" 
> <WWW.NOSMOPAR.COM>
>
> The site shows "P 57 W/ PREFIX “P” ON ENG, 58-60; D 57-60; DS 57 F’SWP"
> This means it is for a few 57-60 Plymouth, Dodge and Desoto models.
>
> ------------------------------------------------------------------------
>
> Subject:
> [FWDLK] Vacuum advance question.
> From:
> Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>
> Date:
> Wed, 08 Apr 2009 11:13:53 -0700
> To:
> L-FORWARDLOOK@xxxxxxxxxxxxx
>
> To:
> L-FORWARDLOOK@xxxxxxxxxxxxx
>
>
> I bought a MoPar vacuum advance on the Evil pay, recently.
>
> As seen in the attached pic, it was long-ago (apparently) written down 
> as being
> for a 57 D500.
>
> I bought it, as it was cheap, even though its P/N is not shown in my 
> 1955-1958 parts book.
>
> Dave Homstad suggested that this guy might be for a truck, which would 
> not have listings in the
> 55-58 car-parts book.
>
> Does anyone have access to a '58 (apparently, from its P/N) truck 
> parts book, and/or any thoughts
> on its cross-usage on a particular car's application?
>
> The cast-in number, on the V.A.'s control arm, is "13" .
>
> Thanks,
>
> Neil Vedder
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> ------------------------------------------------------------------------

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1