The '56 Plymouth can use the Mopar B-body rearends with little modification.I used the '66 Charger drum to drum rear; had to change the spring perch location and that was all as far as a bolt-up. The '66 Charger rearend is approx. 3" narrower than my old '56 rearend; most of the B-body rearends are narrower. Gary Pavlovich----- Original Message ----- From: "Bill K." <pontiac@xxxxxxxxxxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Thursday, May 29, 2008 9:26 PM Subject: Re: [FWDLK] MORE INSIGHTS~ QUESTIONS ON WHATZIT WORTH Generally, guys who ditch the iron TF either round up the '62 aluminum case with the drum on it, or change the rearend out for a later one with provisions for a regular parking brake, and dump the tapered axle rear. That makes brake service a bunch easier, and generally the newer brakes are superior to the originals. Seems to me that setting up the trans case parking brake is somewhat of a pain and the parts aren't that easy to find, as well.Trouble there is the bolt-in for the 60-62 cars is the 70-74 Cuda rearend - even the one-leggers with high gear ratios for those cars bring pretty good money. I'm not sure what works in the 55-56 and 57-59 cars, if there is a later model Mopar (or even Ford, blasphemy I know, but the wheel bolt pattern is the same) that's a direct bolt-in, or if you have to move the perches on the housing. (I'm sure one can be found that's the right width).Bill K.----- Original Message -----Blank OK guys, got some questions, especially for those who've done later-model drivetrain conversions. I have a cast-iron 57 torqueflite tranny, so can, say a 78 318, be = bolted via adapter, to the old torqueflite? Or, an older 50's Hemi be bolted to a later t-flite? Are there adapters = to use a pushbutton selector on a later t-flite? How does one use the old drum E-brake if you use a later t-flite? Thanks Bill The Magnumguy Romans 8:28-29 http://www.mopowerstyle.net Chapel & Magnum/Cordoba Forums************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|