thanks everyone for the help. I checked the pump and it only seems to
be a little stream from both ports so this is probably the problem. I
also started the car and while testing again with the car running I
found between the valves bodies I noticed gas seeping out of the
gasket nest to the pump in the front of the carb. I found all the top
housing screws loose. so now I am going to get a carb kit for this
and rebuild the carb. any recommendations on doing this myself
{ have done a few over the years but not many 4 barrow carbs. the
carb is a WCFB 2126s Carter it looks new as I have had it restored a
while ago. does NAPA have a complete kit for this or who can rebuild
it and bench test it and does anyone know the cost to have it rebuilt
and how long turn around time is thanks again,
Chuck Deyoe1955 New yorker ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|