Re: [FWDLK] not mine BUT!

[eastern sierra Adj Services <esierraadj@xxxxxxxxx>]

The intake will fit any 315/325 (and, maybe[?] the earlier Dodge V/8's;
the exhaust ports, on the heads were different, but the intake-ports
were the same.

Of course, the 325 engines had rectangular -pattern mounting studs/bolt
holes on the intakes, and on the carb bases..

The 315's had square-pattern studs, on the intakes, and square pattern
carb base-holes.

The square-pattern studs can be re-positioned
to a rectangular pattern, to accomodate the rectangular WCFB's (or
AFB's).

But, as the seller states, this racing intake (derived from the
Kiekaeffer design) does not have any heat cross-over passages in it, so
"cold-starting/operation" could be problematic.


Neil Vedder

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1