-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Tommy Taylor
Sent: Friday, January 05, 2007 5:51 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Greasing rear axle bearings
I think I have a rear wheel axle bearing that wants to seize because
of a lack of grease. I finally had the presence of mind to do a more
careful review of the factory service and repair manual and found that
there are plugs where the bearing are located and these are to be
removed and “short fiber” grease used to lubricate these bearings.
Seems like years ago I had this sort of grease in a can for greasing
front bearings. In order to inject the grease, am I supposed to
remove the plug and install a grease fitting so I can use my grease
gun? My manual is not specific on that. Thanks.
Tom Taylor
55 Dodge
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.4/615 - Release Date:
1/3/2007 1:34 PM
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
<http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
<http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>