Re: [FWDLK] Turn Signal - 1955 Dodge Coronet

[Greg Filtz <filtz1@xxxxxxxxxxx>]

Tom,

This one I know about.    This same thing happened to me.    Take a look 
at both the front running light and the back tail light on the right 
side of your car.     You are looking for a short or non-contact due to 
rust etc.    On mine, I ended up running a separate ground wire for my 
front running light to resolve the situation.   Mine rusted the back of 
the light socket from making a good ground to the bumper to complete the 
circuit.   It seems as though the turn signal needs both of the lights 
to be working to function correctly.   Also check to see if you have the 
correct bulbs in both of these lights.

Hope this helps.
Greg in WI
1956 Dodge Royal Lancer


Tom Taylor wrote:

> I replaced the bulb in my right rear tail light, brake light, turn 
> signal socket.  The tail light function works but no light on turn 
> signal.  The right front turn signal light  flutters.  The turn signal 
> relay audible  clicks once and stops.  Left side works fine.  Any 
> trouble shooting hints here?  Tom

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1