[FWDLK] Brake Lines Leaking

[Ron Waters <ronbo97@xxxxxxxxxxx>]

Grrrr ! The brake line that runs from the master cylinder to the 4-way
connector on the left frame rail is leaking at the connector. It leaks from
the top of the cad plated connection, where the brake line goes thru. Since
this was discovered, here's what I've done:

*Bought a new, quality double flare tool (KD2199) to replace my old one.

*Created two identical lines as the one that was leaking. Double flared the
ends. Swapped out the initial line for one then the other. Followed
instructions on how to double flare brake line to the letter. I have a fair
amount of experience doing this as well.

*Swapped out the connector with another identical one.

None of the above has solved the problem.

Any thoughts ?

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1