Re: [FWDLK] re intake manifold re 361.383, 413 engines

[David Homstad <dhomstad@xxxxxxxxxxx>]

Fern,

Yes and no. There are B blocks and RB blocks. The RB (Raised B Block) blocks
are taller in the bores, so the heads are spread farther apart and intakes
are not interchangeable with B blocks. A 413 is a RB block. A 361 is a B
block. There were 2 types of 383s in that period, one an R and one an RB.
So, if your intake (2x4?) is from an RB383 it will fit. If it is from a B383
or 361, it will not fit.

You might want to re-ask this question with the casting number from the
intake.

Dave Homstad
56 Dodge D500

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Fern Rivard
Sent: Thursday, August 11, 2005 10:50 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] re intake manifold re 361.383, 413 engines

>    Can someone please tell me if the intake manifold from a 1958/59
> 361 or 383 fit unto a 1959 413 engine?
>
> Thanks from Fern
>
>
>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1