Re: [FWDLK] weather stripping needs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] weather stripping needs



Jimmy,
Bernbaums do a lot of the repro trim & rubber etc. However, the most of it
comes of a roll so there is no true molded trim etc.I have found that using
an alternative can sometimes be the better option, some Jaguar car trim is
very close in profile & has a bit more meat in it . This is more important
with the door seals. I would shop around & get some samples, then make the
choice.
Dave.
----- Original Message -----
From: "Jimmy Cunningham" <Jmmyjam@xxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Wednesday, July 14, 2004 8:46 PM
Subject: [FWDLK] weather stripping needs


> Hey all,
>
> Can anybody recommend a place where I can get weatherstripping for my 1957
Plymouth Belvedere (2 Dr Hardtop).  I tried Clester's Rubber based on a
recommendation from someone a while back but Clesters doesn't do Plymouths.
> Thanks for any information.
>
> Jimmy



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.