Re: [FWDLK] 1959 Dodge 326 Exhaust Rocker Arms

[David Homstad <dhomstad@xxxxxxxxxxx>]

Eric,

Your Dodge 326 is essentially the same engine as the common 318 used through
1965. You might try eBay.

Here is a whole early 318 head with rockers on eBay for $50.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=247980565
1&category=33617&sspagename=WDVW

Dave Homstad
56 Dodge D500

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of eskowron@xxxxxxx
Sent: Monday, May 31, 2004 11:29 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] 1959 Dodge 326 Exhaust Rocker Arms

Hello everyone,

I am getting closer with my '59 Dodge 326 project, but now have discovered
that I need three exhaust rocker arms.  The rockers are not adjustable;
there is a "cradle" pressed into the rocker arm for the push rod; three of
them are worn beyond salvage due to plugged oil passages.  I would be
interested in either simply three rocker arms, or the whole rocker shaft
assembly with arms if anyone has them available or knows where to get them.
Worst case scenario I could just get new "cradles" and press them into the
rocker arms I already have.

Any information/advice would be much appreciated!  After 5 years in a
garage, I am itching to drive this car again!

Thanks Everyone,

Eric Skowron