Re: [FWDLK] The internet was no help, so I have a question...

[Ray Jones <hurst300@xxxxxxxxxxx>]

Title: Re: [FWDLK] The internet was no help, so I have a question...

If time isn't critical, check your local auctions. A great source of tools and stuff.  At least once a month I see a compressor and many times it's slightly used in a home shop. Don't pass on an old one either. I've had a york 2 cyl. compressor for nearly 40 years and have no idea how old it was before I got it, and it's still running great. It's outlasted 2 tanks, and they're harder to find.

Usually held on Fri or Sat, estate sales are very good,especially if it's an older persons home. I've found/bought brand new Craftsman wrench sets, ratchets and suchlike, usually given as Christmas gifts and never opened or slightly used. And very cheap, 1/4 or 1/3 retail.

Shelving and other shop equiptment is a bargain at these auction also. Recently I bought 2 metal cabinets about 18" deep 4' wide and 6' high with doors & 5 shelves for $13. each.
Ray Jones
 
> From: "mr. louthan" <newport61@xxxxxxx>
> Reply-To: "mr. louthan" <newport61@xxxxxxx>
> Date: Tue, 4 Nov 2003 09:48:25 -0700
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: Re: [FWDLK] The internet was no help, so I have a question...

> another thing to consider is if you will need to move it around. the smaller ones with wheels are good if its necessary to get it close to where its needed. but then there will be someone who wants to borrow it!.  also the oiless pumps are very loud, and while i dont quite know why they all have a tag that says to drain off the pressure when youre finished. Have had my Campbell-hausfeld 60 gal vert. for 7 years with no problems and these are available at home depot for around $450. good luck............Mr. Louthan  61' Newport
>  
>  
>  
> >  
> > ----- Original Message -----
> >  
> > From: Garrett
> >  
> > Sent: Monday, November 03, 2003 6:33 PM
> >  
> > To: L-FORWARDLOOK@xxxxxxxxxxxxx
> >  
> > Subject: [FWDLK] The internet was no help, so I have a question...
> >  
> >  
> >     
> > As the title indicates, I spent quite a bit of time searching the internet for decent opinions, but had trouble finding any.
> >  
> >  
> >  
> > So anyway...I'm going to be getting an air compressor as a birthday present so I can stay up til all hours playing with air ratchets, but it's up to me to figure out which one I want.  Sears has a really good deal on a Craftsman 30gal "6"hp compressor, however it's oil-free, and I've heard from more than one source that an oiled compressor is a better way to go over an oil free.  The other compressor I'm looking at is a slightly smaller (21gal 4.5hp) but is oil lubricated, they have it at Harbor Freight, but it's a brand I'm not too familiar with (Central Pneumatic I think).  Either one should be sufficient for what I need from an output perspective, but as seeing how the craftsman is only a few dollars more than the other, I'm having trouble passing it up.  Both would be similarly equipped as far as air tools and accessories, so that isn't really a deciding factor.
> >  
> >  
> > My dad had a craftsman compressor for something like 40 years and it never gave him any problems (sold it to a neighbor and it still works...it was, of course, an oiled type compressor), but this is part of the reason I'm having trouble passing up the Craftsman.
> >  
> >  
>  
> Anyone have any advice or insight (on oiled vs. oil-free or on anything in general)?  Anyone have anything good or bad to say about either brand?
>  
> Since this is kind of off-topic (I'll be using it on cars, so maybe not that far off topic), please respond privately as not to bombard everyone with unwanted e-mail.
>  
>  
>  
> Thanks,
>  
> Garrett