Re: [FWDLK] Exhaust Manifold

[Curtis French <cmf392@xxxxxxxxxxx>]

That is correct.  However, at this point your head and exhaust manifold are
over 40 years old, so you might want run a gasket there to compensate for
any warpage/corrosion, even if it isn't "original."

Curtis French

----- Original Message -----
From: "Nick Nichols" <3nichols@xxxxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Saturday, November 09, 2002 12:45 PM
Subject: [FWDLK] Exhaust Manifold


> I was installing an exhaust manifold onto a 383 V8 and noticed there
> was no gasket between the cylinder head and the manifold when I had
> removed the old manifold. Is this correct?  Any info greatly
> appreciated.   Nick Nichols
>
> -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> Need an answer fast? Search the 17,000+ pages
> of the Forward Look Mailing List archives at
>
> http://www.forwardlook.net/search.htm

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Need an answer fast? Search the 17,000+ pages
of the Forward Look Mailing List archives at

http://www.forwardlook.net/search.htm