Re: [FWDLK] Trim removal?

[Terry & Andree Hoeman <tehoema@xxxxxxxxxxxxxx>]

There are screws on the inside edge which have to be removed first.   Window
stops have to at least be lowered to get window down far enough to get to
the screws.  Then you basically push down and out on the molding to get it
to snap off the clips that it is snapped over on the outside.  Not fun but
doable.


----- Original Message -----
From: "David Charles Gedraitis" <dcg@xxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Sunday, August 11, 2002 11:16 PM
Subject: [FWDLK] Trim removal?


> How does one remove the trim that runs just underneath the window on a '55
> Chrysler? It seems to be a combination of the push-in type clips, and some
> screws, but the screws are not accessible due to the window. Does the
> window have to come out? There's no way to get at the screws that I can
> see, but I'd prefer not to have to remove the window...
>
> ~dave
>
> -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> Need an answer fast? Search the 17,000+ pages
> of the Forward Look Mailing List archives at
>
> http://www.forwardlook.net/search.htm

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Need an answer fast? Search the 17,000+ pages
of the Forward Look Mailing List archives at

http://www.forwardlook.net/search.htm