The Parts Book lists the same P/N dual quad manifold for 318 Furys for 57 and 58. Only a single 4 bbl manifold is listed for the 56 Fury. The 350 engine with dual quads also came in 58 Furys. A friend of mine in Los Angles had a 56 Fury back in the 1980's. It had a heater and radio delete, manual transmission, carbs and a dual quad manifold adapted from the Chrysler 300B. It used special spacers between the manifold and heads. The rear wheel openings were perfectly round, not the usual contour. Only a few of these special Furys were built, maybe 10, for racing events such as the Pikes Peak Climb. These Fury parts, like the Dodge D500-1 parts, are not listed in the Parts Book. Dave Homstad 56 Dodge D500
----- Original Message ----- From: Mike Sealey Sent: Sunday, March 25, 2001 5:21 PM To: L-FORWARDLOOK@xxxxxxxxxxxxx Subject: Re: [FWDLK] What years was Poly Dual Quad intake available?
--- gl pavlovich <glpavlovich@xxxxxxxx> wrote:
> Mopar group: Need your input again. Can anyone
> verify what years the dual quad intake was a factory
> option on the 318 Poly motors? I need to check my
> fading memory.
This is from my own fading memory, someone else may
want to correct me.
1956 (Fury 303)
1957 (Fury 318, possibly an option on non-Fury 301s)
1958? (Not sure if they made a 318 Fury or if they
were all 350s; if they did make a 318 Fury in '58 it'd
be 2x4 also. Possibly an option on non-Fury 318s, more
likely a dealer option.)
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
| 
Back to the Home of the Forward Look Network