Re: [FWDLK] valve covers

["Bill G." <nilla6@xxxxxxxxxxxxxx>]

I thought this might interest the group.
I can email the picture to anyone interested.

>From: "Dennis O'Brien/Susan O'Brien" <obt@xxxxxxxxxxx>
>To: "Bill G." <nilla6@xxxxxxxxxxxxxx>
>Subject: Re: valve covers
>
>Bill,
>
>Yes we do and they would look like the ones in the attached photo - unless
>you get the matching finned aluminum spark plug wire cover which fills the
>center and covers the spark plug holes. The prices are $300 for a pair
>unpolished, $400 for a pair polished and $475 for a polished pair with the
>spark plug wire covers.
>
>We also have a finned aluminum valley cover which is $74.95 unpolished.
>
>Send us your mailing address and we can send you a brochure.
>
>Dennis
>
>
>Dennis/Susan O'Brien
>O'Brien Truckers
>29 A. Young Road
>Charlton, MA 01507
>obt@xxxxxxxxxxx
>508-248-1555
>508-248-6179 FAX
>
>
>
>----- Original Message -----
>From: Bill G. <nilla6@xxxxxxxxxxxxxx>
>To: <obt@xxxxxxxxxxx>
>Sent: Saturday, March 17, 2001 8:30 PM
>Subject: valve covers
>
>
>>
>> Do you make valve covers for '56 DeSoto 330 hemi?
>>
>> -bill
>
--------------
Mailing-List:contact desoto-owner@xxxxxxxxxxxxxxx
"Bones heal and chicks dig scars."
"A conclusion is formed when further analysis takes too  much effort"
*It will always work out cheaper (cost:horsepower ratio) to just put a
bigger engine in the thing.
*Comp Cams and Lunati (among others) will make a cam for anything with tires