Re: [FWDLK] Classicfabrication.com - Floor Pans for your Dodge and Plymouth

[Ron Waters <Ronbo97@xxxxxxxx>]

I bought rockers from them for my 58 Ply a couple of years ago.  Generally satisfied with them (certainly better than using the oversize slip on stuff made back in the 60s), although I found that the arc was a little wide and they needed 'encouragement' from below via a floor jack to get them to fit.  Look pretty good, though.  Also they make them out of 18 gauge metal (originals were 20 gauge, except convertible, which were 12 gauge on some cars).

 

Ron 

----- Original Message -----

From: rbmain

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Monday, December 04, 2000 11:01 PM

Subject: [FWDLK] Classicfabrication.com - Floor Pans for your Dodge and Plymouth

Here's a place that seems to do floorpans for 55-59 Plymouth and Dodge.

 

Richard Main

 http://www.classicfabrication.com/