Re: [FWDLK] Wide block 318 carb options, speed equipment

["D n B" <ducksoup@xxxxxxx>]

I have a single 4 intake from I think a 60 Plymouth.... cast iron that will take
 an
AFB, and a 2x4 intake 57 or 58. No carbs and the 2x4 takes a small based WCFB.
Don    ducksoup@xxxxxxx

Joe Mopar wrote:

>      Bruce,
>      Isky makes a cam.
>      Weiand makes a four barrel aluminum manifold.  Headers have to be
>      custom made.  I have an email of a guy who will make some for 150$.
>      Let me know if you are interested.  I have seen the twin four barrel
>      manifold on the net go for about 250$.  Regards,
>      Peter
>
> ______________________________ Reply Separator
 _________________________________
> Subject: [FWDLK] Wide block 318 carb options, speed equipment
> Author:  Forward Look Mopar Discussion List <L-FORWARDLOOK@xxxxxxxxxxxxx> at
> Internet-Mail
> Date:    8/4/98 12:34 PM
>
> Our 61 Fury has a 318 with a single-barrel carb.  Now, I could load a 383 in
> there, but I thought it might be better to keep it more original.  What are
 the
> carb options available to me through original equipment, or via the
> aftermarket?  Are headers available?  If so, from who? (I'm going to have to
> remove the exhaust manifolds anyway to fix leaks and the binding heat riser
> should I want to remain original).
>
> Thanks,
>
> Bruce Clough
> '61 Fury & a bunch of other Mopar stuff...