Re: [FWDLK] POSITIVE to NEGATIVE ground

["Brendan Sheehy" <desoto@xxxxxxx>]

When I change over to negative ground, I do not need to reverse the coil
terminals.  Also, use the 2/0 size battery cables.

lonnie bishop wrote:

> If your vehicle is positive ground, you'll need to do the following:
> 1- reverse the cables at the battery
>                     2. reverse the wires at the ingition coil
>                      3. reverse the wires at the amp gauge.
> Now your system is negative ground. Factory radios and accessories
> should not be affected by this change.
>        Ground  is very important to any charging system. It is highly
> suggested that you ground the battery to a starter  mounting bolt.
> ...... not the frame or engine block as was common practice in the old
> days. This change...... along with your alternator or generator will
> improve the performance of your electrical system  100% .
> J ust trying to help - - Lonnie Bishop
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free @yahoo.com address at http://mail.yahoo.com