Re: IML: Steering Tube Insulator
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Steering Tube Insulator
- From: "jsadowski" <jsadowski@xxxxxxx>
- Date: Tue, 4 Jan 2005 21:05:43 -0700
I THINK Gary Goers has this piece.
John
----- Original Message -----
From: "Alex Ferch" <alxf@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, January 04, 2005 8:50 PM
Subject: IML: Steering Tube Insulator
Evenin' all! I discovered the rubber insulator at the end of my
steering tube is pretty much shot; the ground strap is split as well. It
doesn't seem like a real difficult piece to fabricate, but if there is a
replacement piece available I would be interested. Thanks again in
advance for your help! Alex 63 Crown.
----------------- http://www.imperialclub.com ----------------- This
message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the Administrators should
be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network