RE: IML: TILT-O-SCOPE STEERING WHEEL 66"
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: TILT-O-SCOPE STEERING WHEEL 66"



Gary

I have a 66 & a 67, both with tilt/tele, and although the internal tilt/tele mechanisms are essentially the same, the rest is different - on the 66, the turn switch arrangement, gear shift indicator mechanism, bu light switch, lower column housing, column mounting etc are different to the 67. You would have to do more than a little modification to adapt a 67 column I would think.

Chris Sculthorp

63 Crown Coupe
66 Crown Coupe
67 Convertible

From: imperialdrivein@xxxxxxxxx
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: TILT-O-SCOPE STEERING WHEEL 66"
Date: Tue, 7 Dec 2004 21:54:07 -0600

Hi everyone,I have a 66 conv.that i want to install a tilt-o-scope
wheel/column assy in .Will a 67 Imp. tilt/tell column fit w/o
modifications?Thanks
                             Imperially ,Gary



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.