You don't list the brake hoses as having been replaced. These are so cheap to do that they are often overlooked in the shop's haste to sell you expensive parts. Your symptom sounds to me like bad brake hoses. Replace all of them, not just the front two. If one has failed, the others are close behind. Dick Benjamin -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Bruce Stubblefield Sent: Wednesday, October 13, 2004 10:37 AM To: mailing-list@xxxxxxxxxxxxxxxx Subject: IML: 71 brake problem Hello list, The mighty 71 Imperial has a strange braking problem. When I apply the brakes, they don't release for anywhere from a half a second to about 3 full seconds. This happens with brakes cold and hot, but seems worse when they're hot. Everything in the system has been recently replaced, incl. master cyl, vac booster, calipers, shoes, wheel cylinders. Shop originally said problem was in the master cyl and replaced it, but problem is not solved. Have not taken it back yet, so I suppose if it's supposed to be a master cyl problem, then the replacement one could be defective. Ideas gratfully accepted. thanks, Bruce S ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm