Re: IML: no start
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: no start



Dirty or loose battery terminals can cause this. Be sure they are clean & properly tightened. There can also be corrosion inside the cable that is restricting the current. Next would be the starter is beginning to fail.
----- Original Message -----
Sent: Saturday, September 25, 2004 4:59 PM
Subject: IML: no start

Low battery.  Get it charged, or jump start it.  D^2

Quoting PompRocker@xxxxxxx:

> My 63 chrysler wont start all i get is a clicking sound when i turn the 
> key...whats wrong?
>





-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.