Tom-
The heater valve in my ’63 Crown was
leaking and I sent it off to Old Air Products in Fort Worth, Texas for rebuild. They have
experience with these old valves and I was very pleased with the end product
and the speed they serviced it. It
cost me $93.22 with COD return shipping.
They can be reached at (817) 531-2665 or www.oldairproducts.com. Hope this helps.
Jim
PS- Have your heater core pressure tested
while you have the system apart. I
found a tiny leak there too.
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On
Behalf Of TOMGLOZANNIS@xxxxxxx
Sent: Monday, April 19, 2004 5:33
AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML:62 Heater Control
Valve
Does anyone know where I can get a
'62 Crown, cable operated, Heater Control Valve repaired or replaced. I
live in South Florida, don't need the heat but I don't want the leak.