Side Window Frames
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Side Window Frames



I recently replaced the side window divider rubber on my '63 Crown
Four-Door. As I recall, I undid the couple of screws on the top of the side
window frame and lightly banged the edge of the frame so that I could feed
in the rubber divider seal easier. I think the frames come apart readily w/o
much manhandling, just some soft rubber mallet type of hammering will
suffice to seperate them from the glass.

Eric
Portland, OR

From: "Greg and Russell" <65luxuryliner@xxxxxxxxxxxxx>
Subject: IML: Removing glass from frames
Date: Thu, 27 May 2004 20:28:46 -0500
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
This is a multi-part message in MIME format.

------=_NextPart_000_002A_01C44429.35EC6810
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hello List,

Unfortunately I am going to have to rechrome the frames around the =
windows in my '65 convertible.  Has anyone gone down this road before =
and removed the glass from the frames?  What's the procedure?  I have =
removed the screws at the base of the frame (3) but I am hesitant to =
continue without consulting the List to see if someone has done this =
before.  Obviously, I don't want to harm the glass in any way but it has =
to come out if those frames are going to shine again!  I have four =
'regular' windows and two vent windows and they all need the glass =
separated from the frames.






Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.