Installing a car alarm in my Imperial?

[Laurent Daudelin <laurentdaudelin@xxxxxxxxxxx>]

on 26/03/04 20:11, Brad Hogg at roadhogg@xxxxxxx wrote:

> Here is the info you need.  Match this up with your FSM (or wing it) and you
> should be all set.
> 
> http://www.designtech-intl.com/Content/techsupport/wirecolors/VehicleDetail?mo
> delID=313
> 
> 
> ----- Original Message -----
> From: "Laurent Daudelin" <laurentdaudelin@xxxxxxxxxxx>
> To: "Imperial Club" <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Friday, March 26, 2004 5:30 PM
> Subject: IML: Installing a car alarm in my Imperial?
> 
> 
> I just got a 2-way car alarm and remote start system. So far, all the places
> I called (4) won't install it because they didn't sell it.
> 
> I looked at the documentation and I'm not sure I would be able to do it
> myself. There are a lot of options that need to be connected. I don't even
> know where to put the alarm system "brain"!
> 
> So, does anybody has ever installed a similar system and would be patient
> enough to walk me through it? I have a good understand of electricity and
> own a digital multimeter, if that helps. This is for my Imperial 1993.
> 
> Thanks in advance!
> 
> -Laurent.

Thanks again, Brad! I'll have a look!

-Laurent.
-- 
============================================================================
Laurent Daudelin   AIM/iChat: LaurentDaudelin    <http://nemesys.dyndns.org>
Logiciels Nemesys Software                mailto:laurentdaudelin@xxxxxxxxxxx