Where arew you located? ----- Original Message ----- From: "Brian Shea" <bshea@xxxxxxxxxxxxx> To: "Mailing-List" <mailing-list@xxxxxxxxxxxxxxxx> Sent: Thursday, February 26, 2004 5:31 PM Subject: IML: FW: starting 63 413 > I connected the ballast almost wants to start but will not fire.What is the > plug # for a 413?If I get it started,does anyone want this motor? > > -----Original Message----- > From: Brian Shea [mailto:bshea@xxxxxxxxxxxxx] > Sent: Monday, February 23, 2004 8:03 AM > To: Mailing-List > Subject: starting 63 413 > > > I turned the motor over by hand, put a new battery in it,and it turns over a > little slow and wont fire.I noticed 2 wires that were chewed on the fire > wall.They look like they were connected to > two white resistor looking things.Are these ballast resistors,and would thi > have an effect on the spark.The points are set perfectly. > > >