68 ATC heat and air

["Leslie" <kansas@xxxxxxxxxxxxxx>]

Hi Bob,

I did that to mine 2 years ago and my ATC still works fine.  That seems to
be the most common issue which stops the ATC from working in these models.

Leslie '67 Sedan
----- Original Message ----- 
From: "BOBSMOPAR" <bobsmopar@xxxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, February 14, 2004 6:06 PM
Subject: IML: 68 ATC heat and air


Hi All 67& 68 Imperial owners and list
I think I might have solved my problem with the broken vacuum ends on the
unit in the passengers side kick panel.
I was going to try to glue the plastic fittings back on when I got an idea
here is what I did.
Instead of doing that I took out the unit and removed the cover.
Then I numbered all the hoses and the same ones on the plugs that go on the
fitting.
Then I removed the hoses out of the rubber grommets that held the hoses.
Then I used new vacuum connectors and reattached the vacuum lines.
And now I do not have any lines that are unhooked.
As soon as I get the valve covers back on and restart the engine I will let
you know if this fix worked and if my heater works again.
Bob
68 Imperial convertible