Bent push rods
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bent push rods



Run some Marvel Mystery oil through the gas and add some to the oil. This
might help clean up the valve stems.
Kent
67 Imperial 4dr ht
----- Original Message -----
From: "Rich" <RJZ123@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, December 06, 2003 2:13 PM
Subject: IML: Bent push rods


>   I want to remind us all to resist the temptation to run a car thats
> been sitting with the old gas in the tank.  It may run fine - but will
> create varnish [looks like tar- I've seen it] on the valve stems. My
> previous 60 Imperial did this just after I bought it. It bent several
> push rods.
>
>   '58 Plymouth - "Christine"
>   '59 DeSoto
>   '60 Imperial  cnvt.
>   '60 Fury  cnvt.
>   In Sunny S. Fla.
>
>
>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.